Netgear R8300 - Default login IP, default username & password

To get access to your Netgear R8300, you need the IP of your device, the username and password. You'll find such information in the Manual of your Netgear R8300 router. But if you do not have the manual for your router or you do not want to read the whole manual to find the default login information then you can use the quick guide below. To get to the router login page it's necessary that you are connected to the router. The default network name (SSID) is NETGEARXX .

Netgear R8300 Login Guide

Open your web browser (e.g. Chrome, Firefox, Opera or any other browser)
Type 192.168.1.1 (the default IP to access the admin interface) in the address bar of your internet browser to access the router's web-based user interface.
You should see 2 text fields where you can enter a username and a password.
The default username for your Netgear R8300 is admin.
The default password is password.
Enter the username & password, hit "Enter" and now you should see the control panel of your router.

Netgear R8300 router default login

If above login credentials doesn't work with your Netgear R8300 router then try this method

Try different ID/password combinations that are widely used by Netgear that you'll find below. In this list are the most popular default username and password combinations used by Netgear. Sometimes the username and password doesn't work that we mentioned in the top of this guide. Then you can try these username/password combinations below to get access to your Netgear R8300 wireless router.

#	Username	Password
1	admin	password
2	admin	1234
3	admin
4	admin	admin
5		password
6	comcast	1234
7	attadmin
8	(blank)	password
9		attadmin
10	(blank)	admin
11	admin	(specified by the user)
12	(blank)	1234
13	admin	(blank)
14	admin	changeme
15	admin	netgear1
16	n/a	n/a
17	super	5777364
18	superuser	password
19	(blank)
20	mso/admin	changeme/password
21	n/a	password
22		1234
23	attadmin	(blank)
24	(blank)	printed on router
25	voo	WPA key on the label, uppercase
26	admin	setup
27	cusadmin	highspeed
28	(blank)	(blank)
29	cusadmin	(blank)
30	admin	(specified by user)
31		cktadmin
32	superman	21241036

Default login IPs for my Netgear router

You tried different router IPs but nothing worked? Did you try the following IPs? In the list below we listed all known router IPs for the manufacturer Netgear. Maybe this will work for you.

#	Default Router IP
1	192.168.1.1
2	192.168.0.1
3	192.168.0.100
4	192.168.100.1
5	192.168.1.250
6	192.168.0.227
7	192.168.0.101
8	192.168.61.1
9	http://www.routerlogin.net
10	http://www.mywifiext.net
11	192.168.0.233
12	192.168.0.239
13	192.168.0.230
14	192.168.0.228
15	192.168.168.168
16	192.168.0.224
17	www.mywifiext.com
18	10.0.0.138
19	172.16.0.1
20	192.168.0.231
21	192.168.1.254
22	192.168.0.229
23	http://m.home
24	10.1.10.1
25	192.168.1.240
26	192.168.0.237
27	192.168.0.232
28	192.168.0.201
29	192.168.10.1
30	192.168.0.160
31	192.168.0.225
32	192.168.1.251
33	192.168.0.200
34	192.168.15.1
35	192.168.254.254
36	192.168.58.21
37	192.168.1.3
38	192.168.0.102
39	192.168.0.236
40	192.168.0.235
41	192.168.0.202
42	192.168.0.240
43	192.168.0.226

Manuals for Netgear R8300

Manual
Quick Install Guide
Datasheet

Nothing of the methods worked for me and I still not get access to my Netgear !

All you need to do is to reset your modem. This can be done easily by clicking on the reset button at the back or at the bottom of your router. If you hold down this small button for approximately 20 seconds, (you may have to use a toothpick), then your modem will get restored to the factory settings. What you need to keep in mind is that when you reset your modem, you will lose your connection online. It is therefore better to take an expert's assistance in this regard. Note: If you have not enough information, it is obviously recommended that you should get help from a person who has all the knowledge about this topic.